background image

02

Install Guide

NOTE: We highly suggest that you have a professional camera installer preform these 
steps to insure accuracy with device installation. Furthermore, to insure vehicle health 
upon completion of installation.

1. Please read the tool list section carefully and bring your own tools before installation.
2. Please read the packing list section carefully and check when unpacking.
3. Observe the vehicle environment before installation.

Follow the principle below:

A. Installation location does not affect the driver’s vision.
B. The location of forward facing camera must be installed within the working

range of the wiper.

C. The location of driver facing camera should not affect the rear view mirror.

4. The appropriate installation location should be selected according to the vehicle

environment. This document is for reference only.

5. The appropriate powering method should be selected according to the vehicle

environment. This document is for reference only.

6. If there is a problem with the installation of a special vehicle, please contact your local 
installer for additional assistance. 

Product Introduction

M Vision is a cost-effective device developed for vehicle video surveillance and 
remote video surveillance. 
Its characteristics are as follows:
•  Two Cameras: the forward facing camera (external facing) and the driver facing 

camera (internal facing).

•  With 3G/4G capability & WiFi you will always be connected
•  Prerecord video for review later
•  SD card video storage up to 256GB
•  Real-time Live Stream Video
•  High Level of security

M Vision has an industrial design with aluminum casing for durability and weight 
that can be used consistently for up to 5 years. It has the ability to see both inside and 
outside of the vehicle at all times. The internal facing camera is 720P that has infrared 
and recording functions while the external facing camera at 1080P and can clearly 
capture events taking place outside of the vehicle. 

It is light weight, convenient, and with the proper installation can fit easily behind the 
rear view mirror for full visibility of the vehicle’s cab. With M Vision’s small size it 
will never obstruct your drivers view so they can always keep their eyes on the road.

For more information, please visit our website www.MiFleet.us/support

Содержание +Vision C6D-M












Отзывы: