Miele WXF 660 Скачать руководство пользователя страница 65

Страница: 65 / 104

Frequently Asked Questions

Messages or faults affecting the TwinDos system

Problem

Possible cause and solution



 is almost empty.
Only a few more
cycles are possible

The detergent in the cartridge is running low. There is
enough left for approx. 4 to 8 wash programs.



Order a new cartridge.



TwinDos  is
empty. Check wash
results

The cartridge is empty.



Replace the cartridge.



Check if the laundry is clean. There may not have
been enough detergent.
If there was not enough detergent, wash the
laundry again.



Use “TwinDos” or
start Maintenance.
See 

TwinDos dispensing via compartment



and / or



has not been used for a long time.



Use TwinDos for one of your next wash cycles.



Carry out the TwinDos maintenance program as
described in “Cleaning and care – TwinDos
maintenance”.



TwinDos
Maintenance for
compartment  and
compartment 
must be started. See


TwinDos dispensing via compartment



and / or



has not been used for too long a time. It is possible
that detergent has dried inside the hoses.



Immediately

carry out the TwinDos maintenance

program as described in “Cleaning and care –
TwinDos maintenance”.

The messages shown on this page are examples. They may differ depending on
whether they refer to compartment





The messages will appear at the end of the program and when the washing
machine is switched on, and need to be confirmed with the

sensor button.

Содержание WXF 660









































































































Результаты поиска

Содержание WXF 660

Отзывы:

Похожие инструкции для WXF 660

Бренды по названию

Популярные бренды

Miele WXF 660, Руководство по эксплуатации

Результаты поиска

Содержание WXF 660

Отзывы:

Похожие инструкции для WXF 660

Бренды по названию

Популярные бренды