Miele WXF 660, Руководство по эксплуатации

Страница: 18 / 104

Before using for the first time
18
3. Removing the shipping
struts

Damage resulting from failure to
remove the transit bars.
Failure to remove the shipping struts
can result in damage to the washing
machine and to adjacent cabinetry or
appliances.
Remove the shipping struts as
described in “Installation and
connection”.
The following message appears in the
display:
 Remove shipping struts

Confirm with the OK sensor button.
4. Commissioning TwinDos
The UltraPhase 1 and UltraPhase 2
values are pre-set in the standard
settings and only need to be confirmed.
The following message appears in the
display:
 TwinDos
 Confirm with the OK sensor button.
The following message appears in the
display:
Set up now
 To set up TwinDos now, touch the
OK sensor button.
 To postpone setup until later, touch
the

sensor button until Set up later
appears in the display and press the
OK button to confirm.
Determining the water hardness
Water hardness is an indication of the
amount of minerals dissolved in water.
The more minerals in the water, the
higher the water hardness and more
detergent must be dispensed.
Useful tip: You can measure the water
hardness yourself using the enclosed
test strip. Alternatively, your local water
authority will be able to tell you the
hardness of water in your area.
 Dip the test strip in the water for
approx. 1 second. Shake excess
water off the test strip.
After approx. 1 minute, and based on
the coloration, you will be able to read
the water hardness from the table
below.
Test strip Hardness range
4 green areas  Hardness level I
1 red area
2 red areas

Hardness level II
3 red areas  Hardness level III
4 red areas