Problem solving guide
72
Fault message after a programme has been interrupted.
Problem
Cause and remedy
Drainage fault. Clean
drain filter and pump.
Check the drain
hose.
The water outlet is blocked or restricted.
The drain hose has been fixed too high.
Clean the drain filter and the drain pump.
The maximum delivery head is 1.8 m.
Water intake fault.
Open the stopcock.
The water intake is blocked or restricted.
Check whether the stopcock has been properly
opened.
Check whether the intake hose is kinked.
Check whether there is sufficient water pressure.
The filter in the water intake is blocked.
Clean the filter.
Fault F. If restart
fails, call Service.
There is a fault.
Disconnect the washing machine from the mains
electricity supply, either by switching it off at the
wall socket and withdrawing the plug, or by dis-
connecting it at the circuit breaker.
Wait
at least 2 minutes
before reconnecting the
washing machine to the mains electricity supply.
Then switch the washing machine on again.
Restart the programme.
If the fault message appears again, contact Miele.
Waterproof system
activated. Close
stopcock and call
Service
The water protection system has reacted.
Close the stopcock.
Call Service.
To switch off the fault messages: Switch the washing machine off with the
but-
ton.
Содержание WWV 980 WPS Passion
Страница 120: ...M Nr 11 003 430 00 en GB WWV 980 WPS Passion ...