Before using for the first time
22
5. Commissioning TwinDos
Skip
Continue
Set up "TwinDos"?
Touch the
Continue
sensor to set
TwinDos up straight away.
Tip:
To postpone setup until later:
Touch the
Skip
sensor. The following
message will then appear in the display:
It is possible to set up later in "Settings" /
"TwinDos".
Confirm with
OK
.
Settings for compartment
The procedure below describes the pro-
cedure for Miele UltraPhase 1 and Miele
UltraPhase 2. The procedure for other
detergents is similar.
No agent
Agent for comp.
Miele
UltraPhase 1
Universal
detergent
Colour
detergent
Delicates
detergent
Delicates/
Woollens
OK
11:02
Touch the
Miele UltraPhase 1
sensor.
The following message will then appear
in the display:
Please enter the dosing recommendation
of your detergent for a wash with normal
soiling. Take note of your water hardness
level.
The dispensing quantity for
UltraPhase 1 is pre-set for
(hard-
ness level II)
.
60
59
58
61
62
Dosage for comp.
ml
OK
11:02
Confirm the pre-set value with the
OK
sensor, or change the value.
UltraPhase 1
Hardness level I
48 ml
Hardness level II
60 ml
Hardness level III
72 ml
The following appears in the display:
Insert container
Содержание WWV 980 WPS Passion
Страница 120: ...M Nr 11 003 430 00 en GB WWV 980 WPS Passion ...