Miele WWF 060, Руководство по эксплуатации

Страница: 34 / 92

Spinning
34
Final spin speed in the wash
program
When a program is selected, the
optimum spin speed for the wash
program is always shown in the display.
A faster spin speed can be selected for
certain wash programs.
The highest selectable spin speed is
indicated in the table.
Rinse-spin
There is a spin cycle after the main
wash and between the rinse cycles. A
reduction in the final spin speed will
also reduce the interim spin speed as
appropriate.
Omitting the final spin (Rinse hold)
If Rinse hold is selected, the laundry
remains in the water following the final
rinse cycle. This helps prevent creasing
if the laundry is not going to be
removed from the drum immediately
after the end of the program.

Set the spin speed  (

).
To start the final spin:
The washing machine will display the
maximum spin speed possible. You can
reduce the spin speed.

Touch the Start/Stop sensor button.
Ending the wash program
For if you want to remove the laundry
when it is dripping wet and without
spinning.

Reduce the spin speed to No 
(0 rpm).

Touch the Start/Stop sensor button.
The water will be pumped away.
Deselecting the rinse-spin and final
spin
 Before the start of the wash program,
reduce the spin speed to
No 
(0 rpm).

Touch the Start/Stop sensor button.
After the final rinse cycle, the water will
be pumped away and the anti-crease
phase will switch on.
An additional rinse cycle is carried out
with this setting for certain wash
programs.