Initial commissioning
19
3. Removing the shipping
struts
Failure to remove the shipping
struts can result in damage to the
washing machine and to adjacent
cabinetry or appliances.
Remove the shipping struts as
described in “Installation and
connection”.
The following message appears in the
display:
Remove shipping struts
Confirm with the
OK
sensor button.
4. Starting the calibration
program
For optimum water and energy
consumption and excellent wash
results, it is important to calibrate the
washing machine.
To do this, the
Normal
program
must
be run without laundry and without
detergent.
No other programs can be started until
calibration has been carried out.
The following message appears in the
display:
Open and run "Normal", "Hot+" without
laundry.
Touch the
sensor button until the
OK
sensor button lights up and
confirm this with
OK
.
1:40
Hot+
OK
Max
Turn on the tap.
Touch the
Start/Stop
sensor button.
The washing machine calibration
program has started. It will take
approximately 2 hours.
At the end of the program the following
message will appear in the display:
Set up complete
Содержание WWF 060
Страница 88: ......
Страница 89: ......
Страница 90: ......
Страница 92: ...M Nr 10 669 441 01 en CA WWF 060 ...