Miele WWF 060, Руководство по эксплуатации

Страница: 25 / 92

4. Selecting program settings
25

Level of soiling
You can specify the level of soiling of
the load.
– 
Light
No visible soiling or stains
–

Normal
Visible soiling and/or a small number
of light stains visible
– 
Heavy
Soiling and/or stains clearly visible. A
pre-wash is automatically carried out.
The following parameters will change,
depending on the level of soiling
selected:
– The detergent dosage amount with
automatic detergent dispensing
– With the

Heavy level of soiling
setting, a pre-wash will be carried out
automatically (see “Options”).
– The adjustment of the rinse water
level

Delay start/SmartStart
Delay start
With the delay start function, you can
delay the start of the program.
This function is active when the
setting
SmartGrid
is switched off.
The hours can be set in the values from
00
to
24
. The minutes can be set in 15-
minute increments from 00 to 45 .
Setting the delay start time

Touch the

sensor button.
The following will appear in the display:
Start in
OK




h :00 00

Set the hours with the

sensor
buttons. Confirm with the OK sensor
button.
The display will change:
Start in
OK




h 00 06:
 Set the minutes with the  sensor
buttons. Confirm with the OK sensor
button.
Useful tip: The values will count
upwards and downwards automatically
if you keep your finger on the

sensor buttons.
Changing delay start
The selected delay start time can be
changed before the program start.
 Touch the  sensor button.

If desired, change the specified time
and confirm with the
OK sensor
button.