Miele WWD 120 Скачать руководство пользователя страница 47

Страница: 47 / 84

Problem solving guide

Many malfunctions and faults that can occur in daily operation can be easily
remedied. Time and money will be saved because a service call will not be
needed.

The following guide may help you to find the reason for a malfunction or a fault,
and to correct it.

The programme does not start

Problem

Cause and remedy

The control panel
remains dark.

There is no power to the machine.



Check whether the mains plug is plugged in and
switched on.



Check whether the fuse or circuit breaker has
tripped.

The washing machine has switched off automatically
to save energy.



Switch the washing machine on again by turning
the programme selector.



and



alternately

appear in the time
display.

The door is not closed properly. The door lock could
not engage.



Close the door again.



Start the programme again.
If the fault message appears again, contact the
Service Department.

Содержание WWD 120





















































































Результаты поиска

Содержание WWD 120

Отзывы:

Похожие инструкции для WWD 120

Бренды по названию

Популярные бренды

Miele WWD 120, Руководство по эксплуатации

Результаты поиска

Содержание WWD 120

Отзывы:

Похожие инструкции для WWD 120

Бренды по названию

Популярные бренды