Washing
44
Final spin speed in wash
programmes
When a programme is selected, the
optimum spin speed for this wash
programme is shown in the display.
A faster spin speed can be selected for
certain wash programmes.
The highest selectable spin speed is
indicated in the table.
Omitting the final spin (Rinse hold)
Select the
Rinse hold
Extra.
The laundry is not spun after the final
rinse and remains in the rinse water.
This helps prevent creasing if the
laundry is not going to be removed from
the drum immediately after the end of
the programme.
To start the final spin:
The wash programme is set to the
optimum spin speed. You can change
the spin speed.
Touch the
Change spin speed
sensor.
Select the desired spin speed.
Start the final spin with the
Start/Stop
sensor.
Ending the programme:
Touch the
Change spin speed
sensor.
Select the spin speed
0 rpm
(no
spin).
Touch the
Start/Stop
sensor.
The water will be pumped away.
Interim spin
There is a spin cycle after the main
wash and between the rinses. A
reduction in the final spin speed will
also reduce the interim spin speed as
appropriate.
Deselecting the interim spin and the
final spin
Touch the
Spin speed
sensor.
Select the spin speed
0 rpm
(no
spin).
After the last rinse cycle, the water will
be pumped away and the Anti-crease
phase will switch on.
In some programmes an additional rinse
is introduced with this setting.
Содержание WTW 870 WPM
Страница 126: ......
Страница 128: ...M Nr 11 976 031 01 en AU NZ WTW 870 WPM ...