Cleaning and care
73
Cleaning the water inlet filter
This washer-dryer has a filter to protect
the water inlet valve. The filter in the
union in the open end of the inlet hose
should be replaced every 6 months or
so, or more often if there are frequent
interruptions to the water supply.
First turn off the stopcock.
Unscrew the inlet hose from the stop-
cock.
Remove the rubber seal
1
from the
recess.
Hold the free end of the inlet hose
downwards. Plastic filter
2
will drop
out.
Clean the plastic filter.
Put the filter and seal back in the re-
verse order and reconnect the hose.
Turn on the stopcock and check the
connection is watertight. If water
drips out, tighten the connection.
The filter
must
be put back in place
after cleaning.
Содержание WTF 130 WPM
Страница 112: ......
Страница 113: ......
Страница 114: ......
Страница 116: ...M Nr 10 506 500 03 en GB WTF 130 WPM ...