Miele WTF 130 WPM, Руководство по эксплуатации

Страница: 43 / 116

WASHING
43
AllergoWash
This option should be used where high
standards of hygiene are required. More
energy is used to lengthen temperature
holding times and more water is used to
increase rinsing efficiency. The items
must be suitable for drying in a tumble
dryer
 
and suitable for ironing


.
Steam smoothing
Steam is injected into the drum at the
end of the wash process to reduce
creasing. Reducing the maximum load
by 50 % will give a better result. For
steam smoothing to work properly there
needs to be a certain amount of resid-
ual moisture still present in the laundry
and so the final spin speed is adjusted
accordingly.
The garments must be suitable for
tumble drying
  and suitable for
ironing
 
.
Stains
In order to clean stained laundry more
effectively, you can select a number of
types of stain. The wash programme
will then adapt to the type of stain se-
lected. You can select one stain per
wash cycle.
With some stains, helpful information
will also appear in the display when
they are selected.

Confirm the information with OK .
Further options
Water plus
The water level in the wash and rinse
stages is increased.
You can select by how much the water
level is increased, see "Settings, Water
plus level".
Pre-wash
For laundry with large amounts of dirt,
e.g. dust and sand.
Soak
For heavily soiled and stained items
with protein stains.
A duration of between 30 minutes and 5
hours in 30 minute increments can be
chosen for the soak process. See "Set-
tings" for more information.
The factory default setting is 30
minutes.