Miele WMR561WPS, Руководство по эксплуатации

Страница: 93 / 112

Installation and connection
93
Drainage
The suds are drained through a drain
pump with a 1 m delivery head. For the
water to drain freely, the hose must be
installed free of kinks. The elbow piece
supplied hooks onto the end of the
hose.
If required, the hose can be extended to
a length of up to 5 m. The necessary
parts can be ordered from Miele.
For a delivery head of more than 1 m
(up to a max. of 1.8 m) a replacement
drain pump will need to be fitted.
Please contact Miele for advice.
If required, the hose can be extended to
a length of up to 2.5 m. The necessary
parts can be ordered from Miele.
Drainage options:
1. Directed into a sink or basin:
Please note:
– Hook the hose over the edge and
secure it.
– If the water is pumped into a
washbasin, make sure that it can
drain away freely. Otherwise there
is a risk of water overflowing or of
some of the drained water being
sucked back into the machine.
2. Connected securely to a plastic drain
pipe with a rubber nipple (there is no
need to use a siphon).
3. Connected securely to a floor gully.
4. Connected securely to a washbasin
with a plastic nipple.
Please note:
a
Adapter
b
Spigot nut
c
Hose clip
d
End of the hose

Fit adapter

to the sink drain outlet
using nut

.
 Attach the end of hose  to adapter
 .

Use a screwdriver to tighten hose clip

up close to the nut.