Miele WMR561WPS, Руководство по эксплуатации

Страница: 84 / 112

Installation and connection
84
Installation surface
A concrete floor is the most suitable
installation surface for a washing
machine, being far less prone to
vibration during the spin cycle than
wooden floorboards or a carpeted
surface.
Please note:
 The machine must be level and
securely positioned.

To avoid vibrations during spinning,
the machine should not be installed
on soft floor coverings.
If installing on a wooden joist floor:

We recommend a plywood base at
least 59 x 52 x 3 cm). The base
should span several joists and be
bolted to the joist and not only the
floorboards. Check for the presence
of pipes and cables first.
Tip: If possible, install the machine in a
corner, as this is usually the most stable
part of the floor.

There is the danger of the
washing machine moving about
during spinning and falling off a
plinth.
For this reason, if the machine is
installed on a raised plinth (concrete
or brick), it has to be secured against
slippage using an MTS floor/plinth
mounting kit (available from Miele).
Transporting the washing
machine to its installation site

Make sure the fixings at the back
of the lid are secure.
Otherwise there is a danger of the lid
being pulled off when carrying the
machine.
Before carrying the machine check
that the lid is secure where it
protrudes at the back of the
machine.
 Carry the washing machine by the
front feet and the protruding lid at the
back.
Removing the transit bars

To remove the left and right covers
1. Pull on the attached stopper,
2. then use a screwdriver to release the
catches at the top and bottom.