Problem solving guide
71
A message appears in the display at the end of the programme
Message
Cause and remedy
Intensive flow: Clean
the filter and jets or
remove foreign
objects from the
pump housing.
The pumps are dirty.
Clean the pumps as described in "Problem solving
guide - Opening the door in the event of a blocked
drain outlet and/or power failure"
Start the programme again after cleaning the
pumps.
The jet in the top of the door ring is blocked with fluff.
Remove the fluff with your finger. Do not use any
sharp or pointed tools to do this.
Start the programme again after cleaning the jet.
If the fault message appears again, contact the
Service Department. The washing machine can still
be used but with reduced functionality.
Align the washing
machine
The smoothing process which the laundry undergoes
at the end of the programme could not be carried out
properly.
Check whether the washing machine is aligned
correctly as described in "Installation and
connection - Levelling the machine".
Check whether the maximum delivery height of
1 m has been exceeded.
If the fault message appears again, contact the
Service Department. The washing machine can still
be used but with reduced functionality.
The messages will appear at the end of the programme and when the washing
machine is switched on and need to be confirmed with the
OK
sensor.
Содержание WMR561WPS
Страница 110: ......
Страница 112: ...M Nr 10 655 670 01 en GB WMR 561 WPS ...