Miele WKR 770 WPS Скачать руководство пользователя страница 43

Programme chart

43

Cottons

cold to 90°C

Max. load 9.0 kg

Use for

Cotton, linen or cotton mix fabric, e.g. table linen, towelling, under‐

wear, T-shirts etc.

Notes

The settings 60°/40°C differ from 

/

 as follows:

– Shorter programme durations
– Longer temperature holding times
– Higher energy consumption

Where particularly high levels of hygiene are required please select a

temperature of 60°C or higher.

Cottons

/

Max. load 9.0 kg

Use for

Normally soiled cotton garments.

Notes

– These settings are the most efficient in terms of energy and water

consumption for washing cottons.

– With 

 the actual wash temperature reached will be lower than

60°C although the wash performance is the same as with the

standard Cottons 60°C programme.

Note for test institutes:

The test programme conforms to EN 60456 and the energy label to Directive

1061/2010.

Minimum iron

cold to 60°C

Max. load 4.0 kg

Use for

Synthetic, mixed fibre and easy care cotton.

Note

Reduce the spin speed for fabric which creases easily.

Содержание WKR 770 WPS

















































































































Отзывы: