Miele WKR 770 WPS Скачать руководство пользователя страница 40

Страница: 40 / 112

Spinning

To omit the final spin (Rinse

hold)



Use the

Further options

button to se‐

lect the

Rinse hold

setting. The laundry

is not spun after the final rinse and

remains in the final rinse water. This

helps prevent creasing if the laundry

is not going to be removed from the

drum immediately after the end of the

programme.

– To start the final spin:

The washing machine will display the

maximum spin speed possible. You

can select a spin speed lower than

this. Start the final spin by pressing

the

Start/Stop

button.

– To end the programme:

Use the

Spin speed

button to select

the

rpm

setting (Without spin) and

press the

Start/Stop

button.

The water will drain away.

To omit rinse and interim spin

and the final spin



Press the

Spin speed

button.



Select the

rpm

setting.

After the last rinse, the water will be

pumped away and the anti-crease

phase will switch in.
In some programmes an additional

rinse is introduced with this setting.

Содержание WKR 770 WPS

















































































































Результаты поиска

Содержание WKR 770 WPS

Отзывы:

Miele WKR 770 WPS, Руководство по эксплуатации, Страница: 40 / 112

Результаты поиска

Содержание WKR 770 WPS

Отзывы: