background image

Contents

4

Garment care label symbols

...............................................................................  41

Detergent

.............................................................................................................  42

The correct detergent............................................................................................  42
Water softeners .....................................................................................................  42
Dispensing aids .....................................................................................................  42
Fabric conditioner and liquid starch ......................................................................  42
Miele recommended detergents ...........................................................................  43
Recommended detergents in accordance with Directive (EU) Nr. 1015/2010......  44

Cleaning and care

...............................................................................................  46

Cleaning the drum (Hygiene info) ..........................................................................  46
Cleaning the external casing and the control panel ..............................................  46
Cleaning the detergent dispenser drawer .............................................................  46
Cleaning the water inlet filter .................................................................................  48

Problem solving guide

........................................................................................  49

The programme does not start..............................................................................  49
The programme is cancelled and a fault indicator light lights up in the control
panel......................................................................................................................  50
During the programme, a symbol appears in the time display .............................  51
At the end of the programme, an indicator light lights up in the control panel .....  51
General problems with the washing machine .......................................................  52
An unsatisfactory wash result ...............................................................................  54
The door will not open...........................................................................................  55
Opening the door in the event of a blocked drain outlet and/or power cut ..........  56

Service

..................................................................................................................  58

Contact in case of malfunction .............................................................................  58
Optional accessories.............................................................................................  58
Warranty ................................................................................................................  58

Installation and connection

................................................................................  59

Front view ..............................................................................................................  59
Rear view...............................................................................................................  60
Installation surface ................................................................................................  61
Transporting the washing machine to its installation site......................................  61
Removing the transit bars .....................................................................................  61
Re-fitting the transit bars.......................................................................................  63
Levelling the machine............................................................................................  64

Screwing out and adjusting the feet.................................................................  64
Installing under a continuous worktop .............................................................  65
Washer-dryer stack ..........................................................................................  65

Содержание WDD320 SpeedCare 1400





















































































Отзывы: