Miele WDD320 SpeedCare 1400 Скачать руководство пользователя страница 50

Страница: 50 / 84

Problem solving guide

The programme is cancelled and a fault indicator light lights up
in the control panel

Problem

Cause and remedy

The fault indicator light



lights up,



and



ap-

pear alternately in the
time display and the
buzzer sounds.

The water inlet is blocked or restricted.



Check whether the stopcock is opened properly.



Check whether the inlet hose is kinked.



Check whether the water pressure is too low.

The filter in the water inlet is blocked.



Clean the filter.

The fault indicator light



lights up,



and



ap-

pear alternately in the
time display and the
buzzer sounds.

The water outlet is blocked or restricted.
The drain hose has been fixed too high.



Clean the drain filter and the drain pump.



The maximum delivery head is 1 m.

The fault indicator light



lights up,



and



appear alternately in the
time display and the
buzzer sounds.

The water protection system has reacted.



Close the stopcock.



Call the Service Department.



and



alternately

appear in the time dis-
play and the buzzer
sounds.

There is a fault.



Disconnect the washing machine from the mains
electricity supply, either by switching off at the wall
socket and withdrawing the plug, or by discon-
necting the relevant fuse on the mains fuse board.



Wait

at least 2 minutes

, before reconnecting the

washing machine to the mains electricity supply.



Then switch the washing machine on again.



Restart the programme.
If the fault message appears again, contact the
Service Department.

Содержание WDD320 SpeedCare 1400





















































































Результаты поиска

Содержание WDD320 SpeedCare 1400

Отзывы:

Похожие инструкции для WDD320 SpeedCare 1400

Бренды по названию

Популярные бренды

Miele WDD320 SpeedCare 1400, Руководство по эксплуатации

Результаты поиска

Содержание WDD320 SpeedCare 1400

Отзывы:

Похожие инструкции для WDD320 SpeedCare 1400

Бренды по названию

Популярные бренды