Miele WDA 210 WPM Скачать руководство пользователя страница 59

Страница: 59 / 72

Installation and connection

Drainage

The machine drains via a drain pump

with a delivery head of 1 metre. The

drain hose must not be kinked as this

restricts drainage. The swivel elbow at

the end of the hose can be turned in ei‐

ther direction, or can be detached if re‐

quired, with a sharp twist and pull.

If required, the drain hose can be exten‐

ded to a length of 5 m. The necessary

parts can be purchased from Miele.
For a delivery head of more than 1 m

(up to a max. of 1.8 m) a replacement

drain pump will need to be fitted.

Please contact Miele for advice.

If necessary, the drain hose can be ex‐

tended to a length of 2.5 m. The neces‐

sary parts can be purchased from

Miele.

Drain hose connection:

1. Direct into a sink or basin:
Please note:

– Hook the hose over the edge and

secure.

– Make sure that the water can drain

away freely without hindrance.

Otherwise there is a risk of water

overflowing or of some of the

drained water being sucked back

into the machine.

2. Connected securely to a plastic drain

pipe with a rubber nipple. There is no

need to use a siphon.

3. Connected securely to a floor gully.
4. Connected securely to a standpipe.

Please note:

Adapter

Nut

Hose clip

End of the hose



Fit the adapter



to the sink drain

outlet using the nut





Attach the end of the hose



to the

adapter





Use a screwdriver to tighten the hose

clip



up close to the nut.

Содержание WDA 210 WPM









































































Результаты поиска

Содержание WDA 210 WPM

Отзывы:

Похожие инструкции для WDA 210 WPM

Бренды по названию

Популярные бренды

Miele WDA 210 WPM, Руководство по эксплуатации

Результаты поиска

Содержание WDA 210 WPM

Отзывы:

Похожие инструкции для WDA 210 WPM

Бренды по названию

Популярные бренды