6. Start the programme - the end of a programme
39
Starting a programme
The programme can be started when
the
Start/Stop
sensor is flashing on and
off.
Touch the
Start/Stop
sensor.
The door will lock (
will appear in the
display) and the programme will start.
The programme status will appear in
the display.
11:02
Cottons
Status
Time left
h
2:27
Main wash
Add laundry
The washing machine will keep you
updated on the programme status and
the time remaining for the programme
to run.
If a Delay start time has been selected,
this will count down in the display until
the programme starts.
The drum lighting switches off once the
programme has started.
End of programme
The door remains locked during the
anti-crease phase and
Finish/Anti-crease
and
Unlock with "Start/Stop"
appear in
the display.
Touch the
Start/Stop
sensor. The
door will unlock.
The door unlocks automatically at the
end of the anti-crease phase.
Pull open the door.
Remove the laundry.
Items left in the drum could discolour
other items in the next wash or
become discoloured themselves.
Remove all items from the drum.
Check the folds in the door seal for
any small articles, e.g. buttons, which
might be lodged there.
Tip:
Leave the door slightly open to
allow the drum to dry.
Switch the washing machine off with
the
control.
If applicable, remove the used
capsule from the detergent
dispensing drawer.
Tip:
Leave the detergent dispenser
drawer slightly open to allow it to dry.
Содержание WCR 860 WPS
Страница 112: ......
Страница 113: ......
Страница 114: ......
Страница 116: ...M Nr 11 016 710 01 en SG WCR 860 WPS ...