Miele WCE 330 Скачать руководство пользователя страница 55

Страница: 55 / 88

Problem solving guide

Fault messages at the end of a programme

Problem

Possible cause and remedy



Check detergent

Excessive foam has built up during washing.



Use less detergent next time and follow the
manufacturer's instructions on dosage given on
the packaging.



Hygiene info: Run a
programme at min.
75°C or "Clean
machine'"
programme

A programme using a temperature above 60°C has
not been run for a long time.



Turn the programme selector to

Further

programmes





Touch the



sensors until

Maintenance

appears

in the display.



Touch the

sensor to confirm.

The following appears in the display:

Clean machine



Touch the

sensor to confirm.



Run the

Clean machine

programme using the Miele

IntenseClean machine cleaner or a universal
powder detergent.

This will clean the washing machine and prevent a
build-up of bacteria and odours.



Align the washing
machine

The

Pre-ironing

Extra which runs at the end of the

programme could not be carried out properly.



Check whether the washing machine is aligned
correctly as described in “Installation and
connection – Levelling the machine”.



Check whether the maximum delivery head of 1 m
has been exceeded.

If the fault message appears again, contact Miele.
The washing machine can still be used, however
without the

Pre-ironing

Extra.

The messages will appear at the end of the programme and when the washing
machine is switched on and need to be confirmed with the

sensor.

Содержание WCE 330

























































































Результаты поиска

Содержание WCE 330

Отзывы:

Похожие инструкции для WCE 330

Бренды по названию

Популярные бренды

Miele WCE 330, Руководство по эксплуатации

Результаты поиска

Содержание WCE 330

Отзывы:

Похожие инструкции для WCE 330

Бренды по названию

Популярные бренды