Miele WCD660 WCS, Руководство по эксплуатации

Страница: 66 / 96

Installation
*INSTALLATION*
66
Installation surface
A concrete floor is the most suitable
installation surface. It is far less prone
to vibration during the spin cycle than
wooden floorboards or a carpeted
surface.
Please note:

The machine must be level and
securely positioned.

To avoid vibrations during spinning,
the machine should not be installed
on soft floor coverings.
If installing on a wooden joist floor:
 Install the machine on a plywood
base (at least 59 x 52 x 3 cm). The
base should span several joists and
be bolted to the joists and not only to
the floorboards. Check for the
presence of pipes and cables first.
Tip: If possible, install the machine in a
corner. This is usually the most stable
part of the floor.

Injury can occur if the washing
machine has not been adequately
secured.
During installation, the washing
machine must be secured on a plinth
to be made available on site
(concrete or brick), in order to ensure
it cannot fall or slip.
Secure the washing machine using a
clamp/fastening bracket (MTS floor
mounting kit – available from your
Miele dealer or Miele spare parts
department).
Transporting the washing
machine to its installation site

Danger of injury due to unsecure
lid.
Make sure the fixings at the back of
the lid are secure. Otherwise there is
a danger of the lid being pulled off
when carrying the machine.
Before carrying the machine check
that the lid is secure where it
protrudes at the back of the
machine.
 Carry the washing machine by the
front feet and by the lid where it
protrudes at the back of the
appliance.