Miele W 931i Скачать руководство пользователя страница 50

Страница: 50 / 56

Programmable functions - To programme

Programming and saving the
programmable functions

Programmable functions are activated
using a combination of the buttons for
the optional functions with the pro-
gramme selector switch. These combi-
nations can call up extra functions not
displayed on the control panel.’

Programming takes place in three
steps:

– select programming mode

– activate programmable function

– store programmable function in

memory

1. Select programming mode

The machine must be switched off
and the door closed. All pushbutton
switches must be released and pro-
gramme selector pointing to “Finish /
Start”.

Press in the “Soak” and “Short wash”
buttons.

Press in the “I-ON / O-OFF” button.

Release the “SOAK” button.

Release the “Short wash” button.

The “ON” light now comes on in the se-
quence display and the “Main wash”
light flashes.

2. Activate programmable function

For the function required turn the pro-
gramme selector to the appropriate
setting as follows:

– for High Water Level

programmable function

turn to SEPARATE RINSE

– for Extra rinse

programmable function

turn to Drain

– for Programme lock

programmable function

turn to QUICKWASH 40°C

– for Gentle action

programmable function

turn to DELICATES 50°C

The indicator light “Rinses 1-2" now
lights up in the sequence display.

Quickly press the “Short wash” but-
ton 4 times, (eg in and out twice).

The indicator light “Rinses 1-2" now
lights up in the sequence display.

The programmable function is now acti-
vated.

If you wish to activate more than one
programmable function, repeat
steps 6 and 7. If not, then:

3. Save the programmable function

Press the I-ON /0-OFF button to
release it.

The machine is now switched off and
the programmable function(s) stored in
memory.

Programmable functions - To programme

Содержание W 931i

























































Результаты поиска

Содержание W 931i

Отзывы:

Похожие инструкции для W 931i

Бренды по названию

Популярные бренды

Miele W 931i, Руководство по эксплуатации

Результаты поиска

Содержание W 931i

Отзывы:

Похожие инструкции для W 931i

Бренды по названию

Популярные бренды