Miele W 463, Руководство по эксплуатации

Страница: 38 / 68

A fault indicator light comes on but the wash programme
continues as normal.
Fault indicator Possible cause Remedy
The Check drain
light flashes. The drain outlet is
restricted. Clean the fluff filter and the drain
pump as described in "Problem solv-
ing guide - Opening the door in the
event of a blocked drain outlet and/
or power failure".
The Check inlet light
flashes. The water inlet is
restricted. Check whether
–
the stopcock is opened wide
enough.
– the inlet hose is kinked.
The filter in the
water inlet hose is
dirty Clean the filter.
The Excess deter-
gent check light co-
mes on. Excessive foam
has built up dur-
ing washing. Use less detergent next time and fol-
low the manufacturer’s instructions
on dosage given on the packaging.
The Main wash indi-
cator light is flash-
ing in the
programme se-
quence display. There is a fault. Start the programme again.
If the fault indicator occurs again,
contact the Service Department.
The Anti-crease/
Finish indicator light
flashes in the
programme se-
quence display. The position of the programme selector was altered after
the start of the programme. Turn the programme selector
back to the programme previously chosen.
A
To switch off the fault indicator: switch the washing machine off with the I-ON/
0-OFF button and turn the programme selector to
Finish .
Problem solving guide
38