Connection to the water
supply
The washing machine must always
be connected to the mains water
supply (inlet hose with blue dots).
Cold water connection (mains water
supply)
The inlet hose with blue dots is used for
mains water connection.
Hot water connection
The inlet hose with red dots is used for
connection to the hot water supply.
Useful hints when connecting to the hot
and cold water supply.
– The maximum temperature at the tap
must not exceed 60C. The ideal
temperature is 55C.
– When connected to the hot (and
cold) water supply, after some time
the washing machine will switch over
to the mains (cold) water supply if no
hot water is being supplied.
The conditions for connection are
described on preceding pages.
This appliance incorporates
backflow protection complying with
AS/NZS 3500.1.2.
No further backflow protection
required for connection to the water
supply.
Installation and connection
52
Содержание W 3831 WPS
Страница 67: ...67 ...
Страница 68: ...Alteration rights reserved 3208 M Nr 06 920 690 04 ...