Technical Information
83
W 48xx
(check for the bleach cup in the detergent drawer). 2) If the bleach cup is
present, program “Water Path Control Unit M24” to “Water Path Control Unit
with 5 Positions”. 3) Also program “Chlorine Bleach” to “Active”.
Using programming mode via the control panel on a W 4800: 1) Position 22
“Water Valves” set to 2 (water path control with 5 positions). 2) Position 30
“Chlorine Bleach” set to 1 (On).
Using programming mode via the control panel on a W 4840: 1) “Water
Valves” set to “Water Path Control with 5 Positions”. 2) “Chlorine Bleach” set
to “On”.
This will prevent F63 faults from occurring.
5
Water Temperature Behavior in the W 4800 and W 4840
SLC Washers - Normal Program
If the user desires to have the wash water heat up to the selected
temperature without regard to the incoming water temperature, “Custom”
should be selected. The machine will heat the water to the desired selected
temperature.
When “Normal” is selected, the washer relies solely on the temperature of the
incoming hot water to heat the wash water. Cold and hot water are mixed to
regulate the wash-water temperature. No additional heating is provided by
the machine. The maximum temperature cannot get hotter than the incoming
hot-water temperature.
6
The Insulation Mats on Some SLC Laundry Machines
May Come Loose
The insulation mat under the lid of an SLC laundry machine may come loose
due to poor adhesion. The proper way to repair this condition is to order a
new mat (damping plate) and replace it. The adhesive has been improved on
the replacement parts. Be sure to consult the parts CD to determine which
item you need.
This applies to W 4800, W 4840, T 9800, T 9820.
7
Concertina Hoses in the W 4800 and W 4840 SLC
Washers; “Waterproof” Shows in the Display
If you experience “Waterproof” in the display of a W 4840 or the “Intake” and
“Drain” LEDs flash rapidly on a W 4800, this indicates water in the bottom
pan. When checking for leaks, be sure to inspect the concertina hose. The
hose is located underneath the detergent dispenser.
A permanent repair is in place for this scenario. The replacement hose
carries part number 06084564. Do not use any earlier part number. Machines
Содержание TOUCHTRONIC W 4842
