6. End of programme - unload the drum
36
End of programme
The programme is finished when
Finish/
Anti-crease
appears in the display. The
Start/Stop
sensor will no longer light up.
The dryer will switch off automatically
15 minutes after the end of the Anti-
crease phase (with programmes without
an Anti-crease phase it will switch off
15 minutes after the end of the pro-
gramme).
Unloading the drum
Only open the door when the drying
process has finished. Otherwise, the
laundry will not be properly dried
through and cooled down.
Reach under the door grip and pull
the door open.
Remove the laundry.
Items left in the dryer could be dam-
aged by overdrying when the dryer is
used the next time.
Always remove all items from the
drum.
Touch the
sensor to switch the
tumble dryer off.
Remove the fluff from the 2 fluff filters
in the door opening: see “Cleaning
and care – Fluff filters”.
Shut the door with a gentle swing.
Empty the condensed water con-
tainer.
Tip:
The condensed water can be used
for the
Steam care
programme. See
“Cleaning and care - Preparing the con-
densed water container for the
Steam
care
programme”.
We recommend that you drain the con-
densed water externally through the
drain hose when drying a full load using
the
Cottons
and
Cottons
pro-
grammes. This will avoid having to
empty the condensed water container
during the programme.
Drum lighting
The inside of the drum lights up so that
you don't forget any items of laundry
when you empty it.
The drum lighting switches off automat-
ically (energy saving).
Tip:
To switch the lighting on again,
open the pull-down menu from the
overview menu and then touch the
sensor.
Содержание TCR 860 WP
Страница 100: ......
Страница 101: ......
Страница 102: ......
Страница 104: ...M Nr 12 031 970 00 en GB TCR 860 WP ...