Programmable functions
65
Programming
You can use the programmable
functions to alter the dryer's
electronics to suit your requirements.
The programming is carried out in 8
steps (
,
,
...
) using the sensor
controls.
Accessing the programming level
Before you begin, ensure that:
– The dryer is switched on: a
programme is selected.
– The door of the dryer is open.
Touch the
Start/Stop
sensor and
hold it down during steps
-
.
Close the dryer door.
Wait until the
Start/Stop
sensor lights
up constantly ...
... and then release the
Start/Stop
sensor.
Choosing and selecting the
programmable function
The number of the programmable
function will appear in the display as
and a number:
e.g.
.
Touch the
or
sensor to scroll to
the next or previous programmable
function:
Programmable function
Cotton drying levels
Minimum iron drying levels
Extended cool down
Buzzer volume
Keypad tone
Lock code
Conductivity
Control panel switch-off status
Dryer switch-off status
Memory
Anti-crease
Buzzer is active
Airways indicator
Backlight brightness dimmed
Confirm the selected programmable
function by pressing the
Start/Stop
sensor.
Содержание TCE 620 WP
Страница 72: ......
Страница 73: ......
Страница 74: ......
Страница 76: ...M Nr 10 621 360 00 en GB TCE 620 WP ...