Miele SO 2822 Series, Руководство по эксплуатации

Страница: 62 / 80

28
Battery charger cradle (HX LS)
(depending on model)
Before charging for the first time, you
must read the information in
“Installation and connection – General
battery information”.
When charging the battery for the first
time, you must use the PowerUnit. As of
the second charging operation, you can
use the battery charger cradle instead.

Push the battery into the charger
cradle until it audibly clicks into place.

Insert the plug into a power socket.
The charging process will start. The
battery charging state indicator flashes
on the left.
You can find out more about the battery
charging state indicator in “Installation
and connection – Battery charging state
indicator”.
If you place the run-down battery in
the charger cradle straight after use, it
will only start charging once the
battery has cooled down.
The cooling process can take up to
60 minutes. The battery charging state
indicator on the charger cradle will not
respond during this time.
Use
Switching on and off

If you have charged the battery in the
wall bracket, take the vacuum cleaner
out of the wall bracket.
 If you have charged the battery
directly, unplug the charger from the
charging socket on the bottom of the
battery.
For the best possible cleaning results,
always activate the ComfortClean
function before switching on the
vacuum cleaner (see “Maintenance –
Activating the ComfortClean
function”).
 Press the On/Off switch on the
Comfort handle

.