Miele SmartLine CSDA 7000, Инструкции по эксплуатации и монтажу

Страница: 43 / 72

Installation
*
I
N
S
T
A
L
L
A
T
I
O
N
*
43
Installation – surface-mounted
If the worktop is more than 24 mm
deep, it must be cut out underneath
on the building-in side on the right or
left hand side.
a
Worktop
b
Maximum 24 mm
c
12 mm
Securing the brackets
1 bracket (supplied with the spacer bar)
must be secured centrally to the right or
left-hand side of the cutout.
Wooden worktops
 Fit the bracket so that it sits flush
with the top edge of the worktop
cutout.
 Secure the bracket with the
3.5 x 25 mm wood screws supplied.
Natural stone worktops
You will need heavy-duty double-
sided tape (not supplied) to secure the
bracket.

Stick the tape along the top edge of
the worktop cutout.

Fit the bracket so that it sits flush
with the top edge of the worktop
cutout.

Press the bracket firmly into position.