Miele SmartLine CS 7102-1 Скачать руководство пользователя

Страница: 33 / 68

Problem solving guide

Many malfunctions and faults that can occur in daily operation can be easily
remedied. Time and money will be saved because a service call will not be
needed.

The following guide may help you to find the reason for a malfunction or a fault,
and to correct it.

Issue

Cause and remedy

The burners do not
ignite when the hob is
being used for the first
time or after it has been
out of use for a longer
period.

There could be an air lock in the gas pipe.



You may need to make several attempts before the
burner ignites successfully.

The burner does not
light after several
attempts.

There is a technical fault.



Turn all of the controls clockwise to the



position

and interrupt the power supply to the hob for a few
seconds.

The burner is not correctly assembled.



Assemble the burner correctly.

The gas shut-off device has not been opened.



Open the gas shut-off device.

The burner is wet and/or dirty.



Clean and dry the burner.

The flame openings are blocked and/or wet.



Clean and dry the flame openings.

The gas flame goes out
after ignition.

The flames do not touch the thermocouple and the
burner does not get hot enough:
The burner parts are not positioned correctly.



Assemble the burner components correctly.

The thermocouple is dirty.



Remove any soiling.

The flame suddenly
looks different.

The burner parts are not positioned correctly.



Position the burner parts correctly.

The burner head or the holes in the burner cap are
dirty.



Remove any soiling.

Содержание SmartLine CS 7102-1





































































Результаты поиска

Содержание SmartLine CS 7102-1

Отзывы:

Похожие инструкции для SmartLine CS 7102-1

Бренды по названию

Популярные бренды

Miele SmartLine CS 7102-1, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание SmartLine CS 7102-1

Отзывы:

Похожие инструкции для SmartLine CS 7102-1

Бренды по названию

Популярные бренды