When to change the thread
lifters
The thread lifters on the suction inlet to
the standard floorhead
*
and upholstery
nozzle can be replaced. Check them
from time to time and replace them if
the pile has worn down.
*
standard or optional accessory
depending on country
To replace the thread lifters
^
Use a knife or similar object to
remove them from the slots.
^
Fit the new thread lifters
If threads or hair have wound round
the bearing on the floorhead roller:
a
Use a coin to release the roller pin
(bayonet connection) and pull out
the pin.
b
Take out the roller.
Remove all threads and hair etc, then
replace the individual parts in the
correct order.
Spare parts are available from your
Miele dealer or from the Miele Spare
Parts Department.
Maintenance and care
31
