manualshive.com logo in svg

Miele PWD 8545 AD, Руководство по эксплуатации, Страница: 5 / 48

Поделиться
Скачать
Miele PWD 8545 AD Скачать руководство пользователя страница 5

GENERAL RULES 

 

REV.0.00_COD.223130_A4

 

Page 5 

 

1.

 

GENERAL RULES 

1.1

 

Limitation of liability 

The manufacturer shall not be held liable for faults or problems which arise due to tampering 
and/or incorrect applications and/or improper use of the machine. 

The owner must comply with all instructions contained in these operating instructions, in 
particular: 

 

Always observe the designated purpose of the machine. 

 

Required maintenance should always be performed immediately. 

 

Use of the machine should be limited to persons with proper skills and abilities who have 
been properly trained and instructed on the use of the machine; 

 

Use only original spare parts. 

Regional regulations and instructions issued by local authorities must be observed. 

 

1.2

 

Validity, contents and filing 

Store these operating instructions in a safe place. If the machine is sold or relocated, these 
operating instructions must be handed over to the new owner or user in order for them to become 
acquainted with the functioning of the machine and all valid safety aspects. 

 

 

Read the warnings carefully before installing and using the machine. 

 
 

 

Содержание PWD 8545 AD

















































Отзывы:

Нет отзывов