Installation
62
The washing machine must be installed by a Miele service techni-
cian or by an authorised dealer.
This washing machine is only intended for items of laundry that
have not been proofed with dangerous or inflammable substances.
Remove packaging carefully with a suitable tool.
The washing machine must be level and secured to the floor (see the
installation plan provided).
To avoid the risk of frost damage, the washing machine must not be
located in rooms which may be subject to very low temperatures.
Do not place the washing machine on carpeted floors if the carpet
may block the ventilation openings on the bottom of the casing.
Transit bars
A
A
A
B
B
The fastening brackets
“A”
on the sides, 2 each on the left and right,
for the transport crate are each fastened with one hexagon head
screw and can be removed.
The transit bars
“B”
, 2 x at the front and 2 x at the rear, are each se-
cured with 3 hexagon head screws and must only be removed at the
installation site before the washing machine is commissioned.
To do this, the machine’s service panel and rear panel need to be re-
moved. Unscrew the hexagon head screws at the bottom of the front
service panel and remove the panel. Unscrew the hexagon head
screws on the rear panel and remove the panel.
