Problem solving guide
53
Service interval and DGUV display
If the following message appears in the machine display after “Power
on”, either a service or the annual DGUV check must be carried out.
1
Service interval
Call the Service Department.
DGUV test
Call the Service Department.
The display will go out after 5 seconds.
Repairs to electrical or steam heated machines must only be
undertaken by a suitably qualified specialist. Repairs by unqualified
persons can cause considerable danger to users.
Malfunctions occurring before or after the start of a programme will
be shown in the display.
The display remains dark. There is no power to the washing machine.
Check the plugs, power switch and (on-site) fuses.
Power cut
Programme stopped.
Press the start button.
Once the power has been restored, press the “START” button.
Tip:
This fault message can also mean: the winding protection of the
drive motor has been triggered.
Allow the motor to cool down.
Water inlet fault
Call the Service Department
if restart does not work.
Check the stopcock and press the “START” button.
