Miele PW 5065 Скачать руководство пользователя страница 9

Страница: 9 / 76

This machine must only be connected to the on-site water supply

using a new hose kit. Old hoses must not be re-used. Check the
hose regularly for signs of wear. Change in good time to avoid the
risk of leaks and subsequent damage.

Faulty components must only be replaced by genuine Miele

original spare parts. Only when these parts are fitted can the safety
standards of the machine be guaranteed.

Do not connect the machine to the mains electricity supply by an

extension lead or a multi-socket unit. These do not guarantee the
required safety of the machine (e.g. danger or overheating).

If this machine is being used in a commercial environment,

please ensure that all relevant health and safety regulations are
obeyed.

This washing machine must not be installed and operated in

mobile installations (e.g. on a ship).

Please refer to the information in "Installation and connection" and

"Technical data".

The accesibility of the plug must be always ensured in order to

separate the washing machine from the mains.

If the washing machine is hard-wired, the isolation switch must

always be accessible to disconnect the washing machine from the
mains.

Warning and Safety instructions

Содержание PW 5065













































































Результаты поиска

Содержание PW 5065

Отзывы:

Похожие инструкции для PW 5065

Бренды по названию

Популярные бренды

Miele PW 5065, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание PW 5065

Отзывы:

Похожие инструкции для PW 5065

Бренды по названию

Популярные бренды