Miele PW 5065 Скачать руководство пользователя страница 71

Страница: 71 / 76

Supervisor level

You can alter the access code to the
supervisor level.

Enter the old code.

Enter a new code.

After you have confirmed the new code,
the display will change to the beginning
of the

Settings

menu.

Display contrast

There are ten different display
contrast settings.

The machine is delivered with the
display contrast on Setting 4.

The display contrast will change as
soon as a different setting is chosen.

Display brightness

There are ten different display
brightness settings.

The machine is delivered with the
display brightness on Setting 5.

The display brightness will change as
soon as a different setting is chosen.

Standby (Display)

To save energy, the display goes out
after 10 minutes and the

Start

button

flashes slowly.

Turning the programme selector or
pressing a button switches the display
back on again.

There are three options:

Standby comes on:

– if a programme is not selected after

the machine has been switched on.

– after a programme has started.

– after the end of a programme.

Not in current Prog.
(the machine is delivered with this
option selected)

Standby comes on:

– if a programme is not selected after

the machine has been switched on.

Settings/Supervisor level menu

Содержание PW 5065













































































Результаты поиска

Содержание PW 5065

Отзывы:

Похожие инструкции для PW 5065

Бренды по названию

Популярные бренды

Miele PW 5065, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание PW 5065

Отзывы:

Похожие инструкции для PW 5065

Бренды по названию

Популярные бренды