Miele PW 5065 OS Скачать руководство пользователя страница 10

Страница: 10 / 76

A risk assessment of the installation must be carried out by a

suitably qualified engineer before this appliance is installed or used.
Installation must only be carried out by a suitably qualified engineer.

The appliance must be fixed in position when it is installed.

Failure to do this could result in personal injury and damage to
property.

If this machine is being used in a commercial environment please

ensure that all relevant health and safety regulations are obeyed.

In areas which may be subject to infestation by cockroaches or

other vermin, pay particular attention to keeping the machine and its
surroundings in a clean condition at all times. Any damage which
may be caused by cockroaches or other vermin will not be covered
by the guarantee.

Please observe the instructions in "Installation and connection"

and "Technical data".

The socket must be easily accessible after installation in order to

disconnect the washing machine from the electricity supply.

For hard-wired machines, the all-pole isolator provided on-site

must be easily accessible after installation in order to disconnect the
washing machine from the electricity supply.

Warning and Safety instructions

Содержание PW 5065 OS













































































Результаты поиска

Содержание PW 5065 OS

Отзывы:

Похожие инструкции для PW 5065 OS

Бренды по названию

Популярные бренды

Miele PW 5065 OS, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание PW 5065 OS

Отзывы:

Похожие инструкции для PW 5065 OS

Бренды по названию

Популярные бренды