Miele PW 5065 OS Скачать руководство пользователя страница 74

Страница: 74 / 76

Minimum iron duration

You can increase the wash duration
for the main wash in the

Minimum

iron

programme.

The machine is delivered with the Block
parameters option selected (the wash
duration will be controlled according to
the programme data which has been
programmed on site).

Pre-wash Cottons/
Minimum iron

You can choose for pre-wash to be
carried out with every

Cottons

and

Minimum iron

programme or to select

it on an individual basis.

If pre-wash has been selected as a
default (

Standard option

), the indicator

light for the Pre-wash button will be lit
up.

The machine is delivered with the

Select from menu

option activated.

List special progs.

The list of special programmes in the
display can be changed.

1. Factory default: The

Quick wash

Shirts

Starch

Pillows

Outerwear

Proofing

and

Separate rinse

programmes are listed in the display.

2. Intensive: The

Intensive wash

and

Hygiene

* programmes are available in

addition to those listed under option

* The

Hygiene

programme only

appears in the display when the

Hygiene

setting is switched on at the

same time.

3. Bakers: The

Flour

+ and

Grease and fat

programmes are

available in addition to those listed
under option

4. Butchers: The

Grease and fat

and

Grease and fat

+ programmes are

available in addition to those listed
under option

5. Hairdressers: The

Towels

and

Capes

programmes are available

in addition to those listed under
option

6. Disinfection: The

Ch. Therm. Dis.

(Chemo-thermal disinfection 20 mins
60°C) and

Thermal Dis.

(Thermal

disinfection 15 min 85°C) programmes
are available in addition to those listed
under option

Hygiene

The option to start the

Hygiene

programme appears in the display
when a programme which uses a
temperature of less than 60°C is
selected. The

Intensive

option needs

to be selected under the

List special

progs.

setting.

The machine is delivered with this
option deactivated.

Settings/Supervisor level menu

Содержание PW 5065 OS













































































Результаты поиска

Содержание PW 5065 OS

Отзывы:

Похожие инструкции для PW 5065 OS

Бренды по названию

Популярные бренды

Miele PW 5065 OS, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание PW 5065 OS

Отзывы:

Похожие инструкции для PW 5065 OS

Бренды по названию

Популярные бренды