Warning and Safety instructions
10
Technical safety
Before setting up the washing machine, check it for any externally visible damage. Do
not install or use a damaged machine.
The electrical safety of this washing machine can only be guaranteed when correctly
earthed. It is most important that this basic safety requirement is regularly tested, and
where there is any doubt the on-site wiring system should be inspected by a qualified elec-
trician. Miele cannot be held liable for the consequences of an inadequate earthing system
(e.g. electric shock).
Unauthorised repairs could result in unforeseen dangers for the user, for which the man-
ufacturer cannot accept liability. Repairs should only be undertaken by a Miele approved
service technician, otherwise any subsequent damage will not be covered by the guaran-
tee.
Do not make any alterations to the machine, unless authorised to do so by Miele.
In the event of a fault or maintenance, the washing machine must be disconnected from
the power supply. The washing machine is only electrically disconnected from the power
supply, if
– the plug has been disconnected from the socket, or
– the mains fuse has been disconnected, or
– the on-site screw-in fuse has been completely unscrewed.
See "Installation and connection - Electrical connection".
This washing machine must only be connected to the on-site water supply using a new
hose kit. Old hoses must not be re-used. Check the hose regularly for signs of wear.
Change in good time to avoid the risk of leaks and subsequent damage.
The cause of any leaks must be dealt with before the washing machine is restarted. Dis-
connect the washing machine immediately if any water leaks out.
Steam heating malfunctions can result in high temperatures at the door, the dispenser
and inside the drum (in particular at the edge of the drum). There is a risk of slight burns.
This only applies to machines with steam heating.
Faulty components must only be replaced by genuine Miele original spare parts. Miele
can only guarantee the safety standards of the machine when Miele replacement parts are
used.
All relevant national provisions and regulations (DGUV in Germany) relating to accident
insurance are applicable to this machine. It is recommended to carry out testing in accord-
ance with the regulatory framework described in DGUV100-500 /Chapter 2.6/ Section 4.
The test book required for the documentation is available from Miele.
Please observe the instructions in "Installation and connection" and "Technical data".
The plug for the washing machine must always be kept accessible so that the machine
can be easily disconnected from the power supply.
For hard-wired machines, an all-pole means of deactivation must be provided on site.
Содержание PW 413
Страница 106: ...106 ...
Страница 107: ...107 ...