Miele PT 7186 Vario, Инструкции по эксплуатации и монтажу

Страница: 23 / 60

Programme duration/Estimated time
remaining
When a programme is selected, the
estimated duration will appear in the
display. Please be aware that it is only
an estimate!
The following factors all affect the
estimated time remaining: residual
moisture content after spinning; type of
fabric; size of load; room temperature;
fluctuations in power supply.
The electronics assess conditions in the
appliance and adjust the estimated
time remaining for a more accurate
reading. Because of this, the time
displayed can alter during the course of
a programme.
Before the end of a programme
In many programmes the heating
phase is followed by the cooling down
phase:
Cooling down will appear in the
display. The programme is not finished
until the cooling down phase has been
completed.
Do not switch the tumble dryer off
before the drying programme has
finished.
E
Remove the laundry when the
programme has finished
Anti-crease (if selected) and Finish will
appear in the display to indicate that
the programme has finished.
During the anti-crease phase the drum
will continue to turn at intervals until the
laundry is removed. This helps to
prevent laundry creasing.
It is recommended that laundry be
removed as soon as the programme
has finished.
^
Open the door.
Short instructions
23