Miele ProLine Teppanyaki CS 1327 Скачать руководство пользователя страница 7

Страница: 7 / 40

Warning and Safety instructions



While the Teppanyaki is under warranty, repairs should only be

undertaken by a Miele authorised service technician. Otherwise the
warranty is invalidated.



Faulty components must only be replaced by genuine Miele spare

parts. The manufacturer can only guarantee the safety of the
appliance when Miele replacement parts are used.



The Teppanyaki is not intended for use with an external timer

switch or a remote control system.



If the plug is removed from the connection cable or if the cable is

supplied without a plug, the Teppanyaki must be connected to the
electricity supply by a suitably qualified and competent electrician.



If the mains connection cable is damaged, it must be replaced

with a special connection cable type H 05 VV-F (PVC insulated),
available from Miele, by a Miele authorised service technician or
suitably qualified and competent electrician in order to avoid a
hazard (see “Electrical connection”).



During installation, maintenance and repair work, the Teppanyaki

must be completely disconnected from the mains electricity supply.
It is only completely isolated from the electricity supply when:

– the mains circuit breaker has been disconnected, or

– the screw-out fuse is removed (in countries where this is

applicable), or

– it is switched off at the wall socket and the plug is withdrawn from

the socket. Do not pull the mains connection cable but the mains
plug to disconnect the appliance from the mains electricity
supply.



Danger of electric shock!

Do not use the Teppanyaki if it is damaged or not working. Switch it
off immediately. Disconnect it from the electricity supply. Contact
Miele.

Содержание ProLine Teppanyaki CS 1327









































Результаты поиска

Содержание ProLine Teppanyaki CS 1327

Отзывы:

Бренды по названию

Популярные бренды

Miele ProLine Teppanyaki CS 1327, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание ProLine Teppanyaki CS 1327

Отзывы:

Бренды по названию

Популярные бренды