manualshive.com logo in svg

Miele ProLine Teppanyaki CS 1327, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele ProLine Teppanyaki CS 1327 Скачать руководство пользователя страница 30

Installation

30

Installation with a downdraft
extractor

Please refer to the separate “Downdraft
extractor with ProLine appliances”
instruction manual for details about
installing a downdraft extractor with a
ProLine appliance.

Fitting the ProLine appliance

Feed the mains connection cable
down through the worktop cut-out.

Starting at the front, position the
ProLine appliance in the worktop cut-
out.

Using both hands, press down evenly
on the sides of the ProLine appliance
until it clicks into position. When
doing this make sure that the seal
underneath the appliance sits flush
with the worktop on all sides. This is
important to ensure an effective seal
with the worktop.

Do not use any sealant (e.g. silicone)
on the ProLine appliance.

If the seal does not meet the worktop
correctly on the corners, the corner
radii (

≤

 R4) can be carefully scribed to

suit.

Fitting several ProLine appliances

Push the built-in ProLine appliance to
the side until the holes in the spacer
bar can be seen.

Fit the cover strip 

 into the

corresponding holes in the spacer bar

.

Starting at the front, position the
ProLine appliance in the worktop cut-
out.

Proceed as described previously.

Содержание ProLine Teppanyaki CS 1327









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды