Miele Polaris Скачать руководство пользователя страница 58

Страница: 58 / 60

Temperature unit

You can chose for the temperature to
be displayed as

°C/Celsius

°F/Fahrenheit

The machine is delivered with
°C/Celsius as the default setting.

Buzzer

When the buzzer function has been
activated, an audible tone sounds at
the end of a programme or when Rin-
se hold is reached.

There are two volumes:

Normal

(the machine is delivered with this opti-
on as the default setting.)

The buzzer sounds at the end of a pro-
gramme or when Rinse hold is reached.

Loud

The buzzer sounds at maximum volume

Loud

at the end of a programme or

when Rinse hold is reached.

Keypad tone

An audible tone sounds each time a
button is pressed.

The machine is delivered with the key-
pad tone deactivated.

Brightness

There are ten different display bright-
ness settings.

The bar chart shows you the setting.

The machine is delivered with the dis-
play brightness on setting 5.

This will change as soon as a different
setting is chosen.

Contrast

There are ten different display con-
trast settings.

The bar chart shows you the setting.

The machine is delivered with the dis-
play contrast on setting 5.

This will change as soon as a different
setting is chosen.

Programmable functions

Содержание Polaris





























































Результаты поиска

Содержание Polaris

Отзывы:

Похожие инструкции для Polaris

Бренды по названию

Популярные бренды

Miele Polaris, Руководство по эксплуатации

Результаты поиска

Содержание Polaris

Отзывы:

Похожие инструкции для Polaris

Бренды по названию

Популярные бренды