Miele PG 8527 Скачать руководство пользователя страница 56

Страница: 56 / 84

Cancelling "Scan the load"

Providing a load has not been scanned, scan the load can be
cancelled by pressing the

button. The programme

overview will appear in the display again.

If loads have already been scanned, these must be deleted
before cancelling. To do this, for each scanned load answer
the question

Delete last entry?

with

Yes

Skipping "Scan the load"

In operating levels B and D, Scan the load can be skipped by
pressing the

button.

If the question

Skip load scan?

is answered with

, the

programme overview appears in the display.

If the question is answered with

Yes

, the programme can be

started again by pressing the

button.

"Load scan skipped" will be printed at the end of the wash
report.

Closing "Scan the load"

After all of the barcodes on a load have been scanned,
close the process by pressing

The

button will flash and the programme can be started.

Accept scanned loads

When "Scan the load" is activated, the Profitronics check
before the programme starts that at least one scanned load
has been saved to memory.

Barcode scanner (optional)

Содержание PG 8527





















































































Результаты поиска

Содержание PG 8527

Отзывы:

Похожие инструкции для PG 8527

Бренды по названию

Популярные бренды

Miele PG 8527, Руководство по эксплуатации

Результаты поиска

Содержание PG 8527

Отзывы:

Похожие инструкции для PG 8527

Бренды по названию

Популярные бренды