Additional settings
79
Additional functions
You can use this menu to customize the current program to suit
technical requirements and the wash load or to reset all additional
functions to the factory default settings.
Additional specialist knowledge is required to alter program settings
and this should therefore be undertaken only by experienced users or
by Miele Service.
Changing program parameters on a validated machine will
necessitate a renewed performance validation.
Open the
Additional settings
menu by switching the machine off with
the
button and then switch it on again with the
button whilst
keeping the
button pressed in.
Open the menu as follows:
Additional settings
Additional functions
Additional functions
Reset
Increased water level
–
Reset
All parameters that have been set under "Additional functions" will
be reset to the factory default setting.
–
Increased water level
The water level will be increased for all programs.
–
Rinse
All programs that incorporate this option will have an extra interim
rinse stage (see the program chart).
–
Dispensing system
Venting the dispensing system and renaming it.
–
Temperature / Time
Adjust the temperature and holding time for the Main wash or Final
rinse program block.
Use the
and
arrow buttons to select an option and confirm
your selection with
OK
.
See the next section for details of how to continue.