manualshive.com logo in svg

Miele MasterCool K 2601 Vi, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele MasterCool K 2601 Vi Скачать руководство пользователя страница 7

IMPORTANT SAFETY INSTRUCTIONS

7

Technical safety

 

The refrigerant system is tested for leaks. This appliance complies

with statutory safety requirements.

 

To avoid the risk of damage to the appliance, make sure that the

connection data (fuse rating, frequency and voltage) on the data
plate corresponds to the household supply.
Check that this is the case before connecting the appliance. Consult
a qualified electrician if in any doubt.

 

The electrical safety of the appliance can only be guaranteed

when correctly grounded. It is essential that this standard safety re-
quirement is met. If in any doubt please have the electrical installa-
tion tested by a qualified electrician.

 

Reliable and safe operation of this appliance can only be assured

if it has been connected to the electricity supply.

 

The outlet must not be concealed behind the appliance and must

be easily accessible so that the appliance can be quickly discon-
nected from the electrical supply in case of an emergency.

 

If the power cord is damaged, it must be replaced by a Miele au-

thorized technician in order to protect the user from harm.

 

The electrical outlet must be properly grounded.

 

Do not connect the appliance to the electrical supply with a power

bar or extension cord. These are a fire hazard and do not guarantee
the required safety of the appliance.

 

If moisture gets into electrical components or into the power cord,

it could cause a short circuit. Therefore, do not operate the machine
in areas where there may be moisture or splashing water (e.g.,
garages, laundry rooms).

 

This appliance must not be installed and operated in mobile in-

stallations (e.g. on a ship).

Содержание MasterCool K 2601 Vi













































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды