Miele KWT 6833 SG Скачать руководство пользователя

Страница: 50 / 72

Information for dealers

Demo mode



The wine conditioning unit can be
demonstrated in the showroom or at
exhibitions in “Demo mode”. In this
mode the control panel and interior
lighting are active but the compressor
remains switched off, so that the
appliance does not cool down.

Switching on demo mode



Switch the wine conditioning unit off
by touching the On/Off sensor.

The temperature display will go out and
the mains connection symbol



will

appear.



Place your finger on the



sensor,

and leave it there.



At the same time, briefly touch the
On/Off sensor (without letting go of
the



sensor).



Leave your finger on the



sensor

until the



symbol appears in the

display.



Then release the



sensor.

Demo mode is activated and the



symbol appears in the display.

Switching off Demo mode

The



symbol is lit up in the display.



Touch the settings sensor.

All symbols available for selection will
appear in the display and the



symbol

flashes.



Touch the sensors for setting the
temperature (





) repeatedly until

the



symbol flashes.



Touch the OK sensor to confirm your
selection.

flashes in the display (means: Demo

mode is switched on) and the



symbol

lights up.

Содержание KWT 6833 SG









































































Результаты поиска

Содержание KWT 6833 SG

Отзывы:

Похожие инструкции для KWT 6833 SG

Бренды по названию

Популярные бренды

Miele KWT 6833 SG, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание KWT 6833 SG

Отзывы:

Похожие инструкции для KWT 6833 SG

Бренды по названию

Популярные бренды