Miele KWT 6833 SG Скачать руководство пользователя

Страница: 58 / 72

Changing the door hinging

The wine conditioning unit is supplied
right-hand hinged. If left-hand hinging is
required, the hinges must be changed.

To change the door hinging, you will
need the following tools:

The glass door is very heavy (approx.
30 kg) and could break.
Two people are needed for changing
the door hinging.



Place a suitable cover on the floor in
front of the appliance to protect the
appliance door and your floor from
damage.

Be careful not to damage the door
seal. If the door seal is damaged, the
appliance door may not close
properly and cooling will be
insufficient.



Open the appliance door as far as it
will go.



Use a flat-blade screwdriver to
carefully remove cover



at the

bottom of the appliance.



Place red safety device



(supplied

with the appliance) onto soft-close
mechanism



and click it into

position.

The safety device prevents the hinge
from snapping shut. Do not remove the
safety device until instructed to do so.



Push pin



up and out from

underneath.

The soft-close mechanism is no longer
fixed to the appliance.

Содержание KWT 6833 SG









































































Результаты поиска

Содержание KWT 6833 SG

Отзывы:

Похожие инструкции для KWT 6833 SG

Бренды по названию

Популярные бренды

Miele KWT 6833 SG, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание KWT 6833 SG

Отзывы:

Похожие инструкции для KWT 6833 SG

Бренды по названию

Популярные бренды